What should you do when you cannot find out fishes in a deep water surface? Do you effort put your fishing rod and you find nothing at all? Well, this is the time you should use a fish finder. It is simple to go to a shop and buy a new one, but it is not completely easy to use the fish finder (even if you surely understand the information in the screen and its buttons). In other words, how to use it wisely is the key.
Identify traditional fish finder
If you focus on the price tag for the first place of purchasing, you will see a traditional category. These can scan at a low water surface and show an overview picture of the sub-surface world under the water only.
The equipment will send out a type of sonar on a regular basis and changes it to become a database. Because this database is gathered the screen indicates from the right side to the left, it also provides you an image of the bottom.
When you receive anything that causes sound waves between your vessel and the bottom is possible – a real fish!
Nonetheless, these fish finders are complicated to use when slowly moving or stable. You still use these when fishes regularly move or you want to have in-depth understanding, feature, bottom kind, etc.
To use these fish finders more effective, you need to pay attention to the chart which often moves from right to left.
This is based on a time range and your decision to move or not, the chart will maintain to scan the similar area and transfers through the screen (from the left to the right). Please keep in mind that the sonar is glancing over the frequent location from time to time again. Thus, this can make it difficult to realize what is being shown on the screen.
Though each brand has different models as well as their instruction, you should know some basic steps to use this tool easier.
Always read the manual when you open the box. This will support you understand more about the product and how to use your device for a while.
When some functions could be absolute and simple to understand, review the guide will help you match it with the right method before beginning with the real use.
Recognize the foundation information
Most fish finders show some standard information such as the speed of your vessel, the current outside temperature, and the depth level that these are measuring. These details are particularly combined together in the top left or right corner in the fish finder console.
The adequate location of this information will be several relying on the make and the design of your fish finder.
Use the sonar or image mode
When you need to use sonar or turn down the image mode, you could read the display from the right side to the left one.
The display of a fish finder often indicates the latest information toward the right corner of the screen and puts the oldest ones to the left. If your watercraft is stable, the fish finder will continue to cycle the display from right to left, but you can see one area only.
Furthermore, the side imaging mode includes a higher frequency, so you will get a better image of what is moved in the water below.
Modify the sensitivity
When you have already looked around about the fish finder on the screen and the automatic mode as well, you enable to start it to your requirements. And one of these features is the sensitivity setting. You should modify it for the ideal water range you are going to fish.
When your boat is in shallow water, be sure the fish finder is changed at a higher frequency. Similarly, when you are in deeper water, the fish finder will need to modify at a lower frequency.
To be honest, it is so tough to set the exact settings. However, having regular errors and practices, you can become a master of this task – setting the set perfect for your fishing voyage.
Put your private fish ID setting
Like using other smart devices, you should also set your private fish ID setting. The reason is that you are protecting your information for the upcoming fishing time. Also, you ought to determine what type of fish you are going to hunt in a specific area. Do not miss out that the quality of the screen involves the pixel sizes.
When you begin your fishing journey, the fish ID feature supports you to aim the type of fishes that you wish to grab. Even if you have no idea the certain fish kinds you want to hunt, consult your fish ID setting.
Get your auto depth
Once you feel much more comfortable with your fish finder, this is the time to get your auto depth. The auto depth feature also supports all users to help them adjust the fish finder. For example, you enable to check the water bottom and determine what is suitable for some regions cannot refer the sonar.
Most advanced anglers will take the fish finder to look deeper water surface, diminishing the first few feet at the same time. They sometimes change the size of the console window to assist them to get a wider view of everything on the water surface.
To sum up…
Do not be afraid that you are not a professional fisherman and you cannot use a fish finder. This is just a tool that everyone can use it without much hassle. The key point here is that you should use your willing to learn something new. No one can control your eager!